Klein Tools 1005-INS Insulated Crimping /Cutting Tool

Insulated Crimping /Cutting Tool... Individually tested to exceed standards.Insulated crimping tool with tapered nose designed for working in confined spaces.Crimping dies marked for insulated or non-insulated solderless terminals and connectors.Accommodates wire from No. 10 to 22 AWG.Wire cutter in nose.Integral guards help prevent hand...

Insulated Crimping /Cutting Tool
Individually tested to exceed standards. Insulated crimping tool with tapered nose designed for working in confined spaces. Crimping dies marked for insulated or non-insulated solderless terminals and connectors. Accommodates wire from No. 10 to 22 AWG. Wire cutter in nose. Integral guards help prevent hand contact with conductive parts. Custom US-made tool steel.
Pictured: 1005-INS

Cat. No. Crimps Handle Color Handle Finish Length Overall Length Weight (lbs.) 1005-INS 10 to 22 AWG orange insulated 9-3/4" (248) 9-3/4" (248) 1.05

All dimensions are in inches and (millimeters) except where indicated.

Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.

Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.

Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.

Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.

Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

Do NOT use to cut steel or ACSR.