KLEIN TOOLS 1625-20 Klein Havens Grip

Klein Havens Grip... Designed for use when light, compact grip is desired and where conductor damage is not a factor.Gripping pressure of the knurled jaw is applied to 1/4" (6.35 mm) cable area.Has a swing latch to help hold cable in the jaw... Pictured:1625-20...

Klein Havens Grip
Designed for use when light, compact grip is desired and where conductor damage is not a factor. Gripping pressure of the knurled jaw is applied to 1/4" (6.35 mm) cable area. Has a swing latch to help hold cable in the jaw.
Pictured: 1625-20

Cat. No. Approx. Weight Each Maximum Cable Maximum Safe Load - lbs Maximum Safe Load - kg Minimum Cable 1625-20 4 lbs. (1.81) g wire rope .75" (19.05) 8000 lbs. 3636 kg 1 B&S .28" (7.11)

All dimensions are in inches and (millimeters) except where indicated.

Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.

When used on/near energized lines, ground, insulate, or isolate grip before pulling.

Do not exceed rated capacity.

Always match proper size and type of grip to application.

Grips are to be used for temporary installation, not for permanent anchorage.