KLEIN TOOLS 1684-74... Chicago® Grip - Curved-Jaw Grip for EHS Cable... When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.To reduce the possibility of slippage and damage to the cable, the...
KLEIN TOOLS 1684-74
| Chicago® Grip - Curved-Jaw Grip for EHS Cable |
| - When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
- To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double "V" contour.
|
| |
|
|
|
| Cat. No. | Approx. Weight Each | Jaw Length | Maximum Cable | Maximum Safe Load - lbs | Maximum Safe Load - kg | Minimum Cable |
| | 1684-74 | 6.30 lbs. (2.85) g | 5" (127) | .55" (13.97) | 8000 lbs. | 3636 kg | .218" (5.54) |
|
| All dimensions are in inches and (millimeters) except where indicated. |
| Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. |
| When used on/near energized lines, ground, insulate, or isolate grip before pulling. |
| Do not exceed rated capacity. |
| Always match proper size and type of grip to application. |
| Grips are to be used for temporary installation, not for permanent anchorage. |
(PLEASE READ)
Powered by
The free listing tool. List your items fast and easy and manage your active items.
Manufacturer: Klein Tools
SKU: KLEIN TOOLS 1684-74