KLEIN TOOLS KT4601... Parallel-Jaw Grip - KT4601... Round jaw.Hot latch closes automatically to guard against grip accidently disengaging from wire.Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists...
| KLEIN TOOLS KT4601 | |
Round jaw.- Hot latch closes automatically to guard against grip accidently disengaging from wire.
- Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists, winches and tackle blocks.
| |
| | | | | | Cat. No. | Jaw Length | Maximum Cable | Maximum Safe Load - lbs | Maximum Safe Load - kg | Minimum Cable | Weight (lbs.) | Approx. Weight Each kg | | | | KT4601 | 5"
(127) | .800"
(20.3) | 10,000 lbs | 4,536 kg | .300"
(7.62) | 7 lbs. | 3.18 kg | | | All dimensions are in inches and (millimeters) except where indicated. |
| | Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. |
| | When used on/near energized lines, ground, insulate, or isolate grip before pulling. |
| | Do not exceed rated capacity. |
| | Always match proper size and type of grip to application. |
| | Grips are to be used for temporary installation, not for permanent anchorage. |
|
|
|
Powered by
Manufacturer: Klein Tools
SKU: KLEIN TOOLS KT4601
Sign In
e-Gift Cards
Share
