Product Overview
CoolAir 210 SmartSeal External (External sealer up to 825psi and 5mm hole)
Product Description
AC SmartSeal External™ is a leak stop suitable for any material. It effectively seals all types of leaks up to 5 mm. Specifically designed to be inert to all kinds of lubricants and refrigerant gases, EXTERNAL does not react to temperature changes.
SMARTSEAL EXTERNAL – EXTERNAL LEAK STOP FOR AIR CONDITIONING AND REFRIGERATION SYSTEMS
DONE IN 5 EASY AND VERY FAST STEPS :
#1 Find the leak by using the usual detection methods.
#2 Once the leak is identified, turn off the system, and clean the application area.
#3 Cut with a knife a quantity of Smart Seal External which is enough to create a ring around the entire diameter of the pipe in the area of the leak
#4 Wear protective gloves and mix the two components for a while. The color must be uniform and you should perceive a slight sensation of heat.
#5 Apply the mixture directly on the leak area, let it adhere to the whole circumference with about .5 inches on each side of the leak area. Wait 4-5 hours for the Smart Seal External to cure and harden. Curing can be accelerated with the use of a heat gun. Once the product is dried, let the system run normally again. If you need to remove the product, spray grease/seal remover on it, wait a moment, grab the ring with pliers or spanners with a little pressure that does not deform the pipe and rotate in one direction.
