null

Fluke 80i-2010s AC/DC Current Clamp

Fluke

(No reviews yet) Write a Review
MSRP: $1,875.97
$1,556.11
(You save $319.86 )
SKU:
80I-2010S
UPC:
095969918770
Availability:
IN STOCK
Weight:
5.10 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Product Overview

Fluke 80i-2010s AC/DC Current Clamp

Key features

  • Conveniently measure current without having to disconnect the load
  • 2,000A AC and DC current clamp
  • Maximum conductor size – 52mm (2.05in)
  • Maximum opening – 81.5mm (3.2in)
General Specifications
Modules 80i-2010s
Dimensions 110 mm x 270 mm x 46mm
Weight 0.710 kg (1.6 lbs), including battery
Output Cable 1.5 m (60 in) Shielded Coaxial cable with BNC plug
Maximum Conductor Size 52.0 mm (2.05 in)
Maximum Jaw Opening 81.5 mm
Output to Zero Auto adjustment with Zero button
Temperature Operating -10 °C to 50 °C (14 °F to 122 °F)
Storage (battery removed) -30 °C to +60 °C (-22 °F to +140 °F)
Operating Humidity ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C)
Operating Altitude 2,000 m (6560 ft)
Storage Altitude 12,000 m (40,000 ft)
Demagnetize Clamp Open and close the Clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less.
Safety IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
Ingress Protection IEC 60529, IP40
Power Supply Type 2 x AA alkaline battery, IEC LR6
Battery Life 150 hours (typically)
Low battery indicator Yes
Electrical Specifications
Current Range 2000 A ac rms, ± 2000 A dc
Output Sensitivity 01 mV/A
Accuracy ± 0.8 % of reading ± 0.2 % of range
Bandwidth for Accuracy Specification DC to 400 Hz
Load impedance >1 MΩ and <10 pF
Frequency Response (small signal) DC to 20 kHz (-3 dB)
Temperature Coefficient 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
Working Voltage 1000 V AC RMS or DC

Reviews

(No reviews yet) Write a Review