Knipex 49 11 A2 7 1/4'' Precision Circlip Pliers-External Straight-Size 2
Easy and reliable assembly: form-fitting inserted and pressed-in tips made of high-density spring steel offer a high level of protection against excessive stress and strain, e.g. when removing stuck rings. The large supporting surfaces and the position of the tips make it more difficult for the rings to fly off.
Precision and durability
High-density spring steel with a score-free surface is used for the tips. This increases the tips' resistance to dynamic and static strain. The tips are 30% more stable than conventional pliers when subjected to one-off overloading while still allowing good accessibility during assembly. Subjected to dynamic strain, the tips' resistance capacity is up to 10 times greater! The tips on the precision circlip pliers are non-detachable!
KNIPEX circlip pliers with overexpansion guard
For the standardised fitting of circlips in the industrial serial production. Particularly manufacturers of sensitive, safety-relevant components (e.g. brakes or gears) higly appreciate the compliance of DIN 471 and 472. The mounting of circlip rings in this case requires pliers with overexpansion guard or a cone. KNIPEX Circlip Pliers with overexpansion guard meet the requirements and furthermore offer a superior durability.
Spring inside the joint: the spring is protected inside the precision bolted joint. It does not hinder work and cannot get dirty or lost.
Tight fit through compression
Circlips are held securely: large contact faces and the position of the tips make it difficult fpr the circlip to bounce off
|No.||49 11 A2|
|Handles||with non-slip plastic coating|
|Standard||DIN 5254 A|
|Size of shaft||3/4 - 2 23/64 Ø Inch19 - 60 Ø mm|
|Tips Ø||5/64 Ø Inch1,8 Ø mm|
|Length||7 1/4 Inch180 mm|
|Net weight||0,375 lbs170 g|