Product Overview
Amprobe ACD-10 PLUS 600A Clamp Multimeter
The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (only 0.4″/10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm).
It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.
- Measures AC and DC voltage to 600V and AC current to 600A to handle residential/commercial and small industrial applications
- Thin jaws, only 10mm (0.4″) thick make it easier to maneuver between tightly packed conductors
- Measures frequency, resistance, and capacitance
- Features continuity beeper to quickly find opens and shorts
- Accommodates conductors up to 1.0″ (25mm) in diameter
- Auto ranging saves time by instantly selecting correct range
- Auto power off to conserve battery life
- Rubber over-molded case absorbs shock
- Includes test leads, battery (installed), soft carrying pouch, and users manual
What’s Included
| Description | |
Included Accessories: Test leads, battery (installed), soft carrying pouch, users manual |
Specifications
| FEATURE | ACD-10 PLUS | ACD-10 TRMS-PLUS |
| True-rms | – | • |
| AC Voltage | 4.000 V, 40.00 V, 400.0 V, 600 V | |
| DC Voltage | 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V | |
| AC Current | 40.00 A, 400.0 A, 600 A | |
| Resistance | 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ | |
| Capacitance | 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF | |
| Frequency | 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads | |
| Temperature | – | – |
| Dual displays | – | – |
| Micro Amps | – | – |
| Accommodates conductors | up to 1.0″ (25 mm) in diameter | |
| Specifications | |
| Display: | 3-3/4 digits 4000 counts LCD display |
| Update rate: | 3 per second nominal |
| Polarity: | Automatic |
| Operating temperature: | °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C |
| Altitude: | Operating below 2000m; Indoor use |
| Storage temperature: | -20 °C to 60 °C, < 80% RH (with battery removed) |
| Temperature coefficient: | nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C) |
| Low battery: | Below approx. 2.4V |
| Power supply: | 3V coin battery IEC-CR2032 |
| Power consumption: | 2.8 mA typical except that 3.3 mA typical for ACA function |
| APO timing: | Idle for 30 minutes |
| APO consumption: | 5 µA typical |
| Jaw opening conductor diameter: | max 26 mm |
| Special features: | 30ms Max Hold; Data Hold; Relative Zero mode |
