- Evergreen OM - Retrofit Condenser Fan Motor (Replaces PSC and Shaded Pole Motors)
- Electronically Commutated (ECM), Electronically Protected
- 1/3 HP (Replaces 1/3-1/12). Two Operating Speeds (Constant Speed), 1075 RPM replaces motors rated 1000-1100 RPM, 825 RPM replaces motors rated 800-850 RPM
- 208-230 Voltage (Allowable Voltage Range 196-264), Single-Phase Input, 50-60 Hz, Totally Enclosed Air Over
- Class B Insulation, -20 to 60°C Ambient
- Rotation: Reversible (Factory Set To CCW Lead End)
- Permanently Lubricated Ball Bearing
- Shaft: 1/2” Diameter, 6.5” Length, 6” Single Flat
- Leads: 54” Length With 1/4” Fast On Terminals, Ground Wire #10 Eyelet
- Mounting: Horizontal or Vertical Shaft-down, Belly Band (Not Supplied With Motor), Extended Clamp Bolts, or OEM Mounting Holes
CROSS REFERENCES: 5KCP39FG1998, 442A, F48AA70A01, HE3E284, HE3E7284, 8053, K55HXBMJ1121, 03151, 3151, 3252, 5KSP39HG2877, 5KSP39HG2923, 5KSP39HG4152, 5KSP39HG4634, 5KSP39HGW155, 5KSP39HGW454, 5KSP39HGW454S, 5KSP39MG4619, 3M804, 4MA54, P-8-3132, 442A, U442A, 442C, FS1016, 323P137 323P566, F48SC6MA4, F48SD6MA12, F48SE6L1, F48SE6L7, HC35SE229, HC37SE208, HC37SE209, HC39ME711, P251-5604, K8661, D719, F138, 3027, 5KCP39EGE179AS, RE129, MTG-3027, 512305511, 512443327, 5SFA39CLP0200, 6303, G6303, F48SF616, D719, FS1016, 323P137 323P566, F48SC6MA4, F48SD6MA12, F48SE6L1, F48SE6L7, HC35SE229, HC37SE208, HC37SE209, HC39ME711, P251-5604, K8661, F138, 3027, 5KCP39EGE179AS, RE129, MTG-3027, 512305511, 512443327
Nameplate Specifications
| Phase: |
1 |
Output HP: |
1/3 Hp |
| Voltage: |
208-230 V |
Speed: |
825/1075 rpm |
| Service Factor: |
1 |
Frame: |
48 |
| Enclosure: |
Totally Enclosed Air Over |
Thermal Protection: |
Electronically Protected |
| Ambient Temperature: |
40 °C |
Frequency: |
60/50 Hz |
| Current: |
2.8 A |
Duty: |
Continuous Air Over |
| Insulation Class: |
B |
UL: |
No |
| CSA: |
N |
CE: |
N |
| A2L Status: |
A2L Certified |
Number of Speeds: |
2 |
Technical Specifications
| Electrical Type: |
Electronically Commutated Motor |
Poles: |
10 |
| Rotation: |
Counterclockwise/Clockwise |
Mounting: |
Extended Studs |
| Motor Orientation: |
Vsd |
Drive End Bearing: |
Ball |
| Opp Drive End Bearing: |
Ball |
Frame Material: |
Rolled Steel |
| Shaft Type: |
Flat |
Overall Length: |
10.98 in |
| Frame Length: |
2.82 in |
Shaft Diameter: |
0.500 in |
| Shaft Extension: |
6.50 in |
General Specifications
| UPC: |
818508029221 |
Weight: |
13.00 LB |
| Packaged Length: |
15.70 IN |
Packaged Width: |
6.70 IN |
| Packaged Height: |
7.10 IN |
Country of Origin: |
Mexico |
