Product Overview
Fasco D140A 1/15 HP Ventilation Motor 1050 RPM 115 Volts
KEY FEATURES
- Ventilation - Unit Heater Motor
- 5" Diameter - 42 Frame
- Permanent Split Capacitor (PSC); Capacitor Required: 4 Mfd-370 Volts (Not Supplied with Motor)
- Thermally Protected
- Open Air Over
- Class B Insulation, 40°C Ambient
- Sleeve Bearing
- 3/8" Diameter Shaft with Flat
- 28" Leads
- (4) Extended Studs Shaft End, (2) Extended Studs Lead End
- Downloads:
- D140 Data Pack
General Specifications
| UPC: | 818508022857 | Weight: | 5.00 LB |
| Packaged Length: | 15 IN | Packaged Width: | 6.13 IN |
| Packaged Height: | 6.31 IN | Country of Origin: | Mexico |
Nameplate Specifications
| Output HP: | 1/15 Hp | Output KW: | 0.05 kW |
| Frequency: | 60 Hz | Voltage: | 115 V |
| Current: | 1.4 A | Speed: | 1050 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Continuous Air Over | Insulation Class: | B |
| Frame: | 42 | Enclosure: | Open Air Over |
| Thermal Protection: | Automatic | Ambient Temperature: | 40 °C |
| UL: | Recognized | CSA: | Y |
| CE: | N | Number of Speeds: | 1 |
Technical Specifications
| Electrical Type: | Permanent Split Capacitor | Starting Method: | Across The Line |
| Poles: | 6 | Rotation: | Clockwise Shaft End |
| Mounting: | Extended Studs | Drive End Bearing: | Sleeve |
| Opp Drive End Bearing: | Sleeve | Frame Material: | Steel |
| Shaft Type: | Flat | Frame Length: | 2.80 in |
| Shaft Diameter: | 0.375 in | Shaft Extension: | 2.4 in |
