Product Overview
Fasco D242 1/20 HP OEM Replacement Motor 1050 RPM 115 Volts
Fasco has discontinued this motor but we have a aftermarket version available at the link below
PEMS D242 OEM Replacement Motor 1/20 HP 1.4 Amp 1000 RPM Replaces Fasco D242
KEY FEATURES
- OEM Direct Replacement Motor
- 5" Diameter - 42 Frame
- Shaded Pole
- Thermally Protected
- Totally Enclosed Air Over
- Class A Insulation, 40°C Ambient
- Sleeve Bearing
- 3/8" Diameter Shaft with Flat
- 27" Leads with .5" Strip
- Extended Studs Shaft End
- Downloads:
- D242 Data Pack
General Specifications
| UPC: | 815585029229 | Weight: | 9.00 LB |
| Packaged Length: | 5.13 IN | Packaged Width: | 5.13 IN |
| Packaged Height: | 10 IN |
Nameplate Specifications
| Output HP: | 1/20 Hp | Output KW: | 0.04 kW |
| Frequency: | 60 Hz | Voltage: | 115 V |
| Current: | 2.0 A | Speed: | 1050 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Air Over | Insulation Class: | A |
| Frame: | 42 | Enclosure: | Totally Enclosed |
| Thermal Protection: | Thermally Protected | Ambient Temperature: | 40 °C |
| UL: | Recognized | CSA: | Y |
| CE: | N | Number of Speeds: | 1 |
Technical Specifications
| Electrical Type: | Shaded Pole | Starting Method: | Across The Line |
| Poles: | 6 | Rotation: | Clockwise Shaft End |
| Mounting: | Extended Studs | Drive End Bearing: | Sleeve |
| Opp Drive End Bearing: | Sleeve | Frame Material: | Na |
| Shaft Type: | Flat | Overall Length: | 6.73 in |
| Shaft Diameter: | 0.375 in | Shaft Extension: | 3.00 in |
