Product Overview
Marathon X507 1 HP Commercial Refrigeration Fan HVAC/R Motor 3 phase 900 RPM 200-230/460 V 56Y Frame
KEY FEATURES
- 70°C ambient
- Enclosed shaft end bracket, vented frame
- Automatic reset thermal protector
- Nameplate 60/50 hertz 190/380 volts, at next lower HP
- Double sealed ball bearings
- 5/8” Dia. x 5” long shaft with flat and keyway
- Threaded lead exit
- Patented VCD™ - Voltage Change Device
- 4 Locating screws 90 degrees apart, 3.33” from outer edge of shaft slinger
- Hubs on both ends will accept resilient base kits.
General Specifications
| UPC: | 722856049025 | Weight: | 46.00 LB |
| Packaged Length: | 19.88 IN | Packaged Width: | 10.25 IN |
| Packaged Height: | 8.12 IN |
Nameplate Specifications
| Output HP: | 1 Hp | Output KW: | 0.75 kW |
| Frequency: | 60 Hz | Voltage: | 200-230/460 V |
| Current: | 5.3-5.3/2.7 A | Speed: | 850 rpm |
| Service Factor: | 1 | Phase: | 3 |
| Efficiency: | 74.5 % | Power Factor: | 52.5 |
| Duty: | Continuous | Insulation Class: | H |
| Design Code: | No Design Code | KVA Code: | J |
| Frame: | 56Y | Enclosure: | Open Air Over |
| Thermal Protection: | Automatic Lock Rotor Only | Ambient Temperature: | 70 °C |
| Drive End Bearing Size: | 6203 | Opp Drive End Bearing Size: | 6203 |
| UL: | Recognized | CSA: | Y |
| CE: | N | IP Code: | 10 |
| Number of Speeds: | 1 |
Technical Specifications
| Electrical Type: | Squirrel Cage Induction Run | Starting Method: | Across The Line |
| Poles: | 8 | Rotation: | Reversible |
| Resistance Main: | 17.6 Ohms | Mounting: | Round Belly Band |
| Motor Orientation: | Horizontal | Drive End Bearing: | Ball |
| Opp Drive End Bearing: | Ball | Frame Material: | Rolled Steel |
| Shaft Type: | Single Special Extension | Overall Length: | 17.06 in |
| Frame Length: | 9.56 in | Shaft Diameter: | 0.625 in |
| Shaft Extension: | 5.06 in | Assembly/Box Mounting: | F1 Only |
